Poly(L-lysine)-poly(ethylene glycol) layers with different structure and their influence on silica suspension stability

The effects of the structure of di- and triblock copolymers of poly(L-lysine) – LYS with poly(ethylene glycol) – PEG as well as the length of nonionic fragment in the LYS-PEG macromolecule on the copolymer chains conformation in the adsorption layer formed on the colloidal silica (SiO2) surface were examined. Spectrophotometry and turbidimetry were applied for the determination of copolymer adsorbed amounts and stability coefficients of silica aqueous suspensions. The electrokinetic parameters such as solid surface charge density and zeta potential were also estimated. The adsorption of LYS-PEG was proved to be the highest at pH 10 whereas the lowest adsorption on the solid surface was found for the triblock copolymer with long fragments of LYS at the same pH value.     

Multiphase topology optimization with a single variable using the phase-field design method

In this study, a multimaterial topology optimization method using a single variable is proposed by combining the solid isotropic material with penalization method and the reaction-diffusion equation. Unlike ordinary multimaterial optimization, which requires several variables depending on the number of material types, this method intends to represent various materials as one variable. The proposed method combines two special functions in the sensitivity analysis of the objective function to converge the design variable into prespecified density values defined for each of the multimaterials. The composition constraint based on a normal distribution function is also introduced to estimate the distribution of each target density value in a single variable. It enables density exchange between multiple materials by increasing or decreasing the amount of a specific material. The proposed method is applied to structural and electromagnetic problems to verify its effectiveness, and its usefulness is also confirmed from the viewpoint of cost and computation time.     

稀土La2O3改性脲醛树脂的黏度特性研究

脲醛树脂(UF树脂)胶黏剂具有胶合强度高、制作简单、成本低廉、原料来源丰富等一系列特点,成为我国人造板生产的主要胶种,是市场上需求量最大的胶黏剂之一。但由于在固化时会放出刺激性的甲醛,游离甲醛高,在使用时严重危害人的健康。近年来,随着人们环保意识的提高,生产和使用低毒UF树脂胶势在必行。本文介绍了稀土氧化镧对脲醛树脂的改性过程并对改性后脲醛树脂胶的各项性能进行了测试。本实验通过在不同反应阶段加入稀土氧化镧,分别探讨它们对脲醛树脂胶黏剂性能影响。实验表明:在脲醛树脂胶中加入稀土氧化镧可以增加黏度、固化时间、固含量,并可以减少游离甲醛释放量。     

热处理对挤压态Mg-6Gd-5Y-1Zn合金组织与性能的影响

通过对Mg-6Gd-5Y-1Zn(质量分数,%)合金在固溶和时效处理状态下显微组织和力学性能的研究发现,α-Mg基体、沿挤压方向分布的条状18R-LPSO相、少量的Mg₂₄(GdYZn)₅ 相以及细层片状的14H-LPSO相构成了挤压态合金的组成相。挤压态合金经固溶(T4)处理后,一部分18R-LPSO相溶入基体,并且基体中的14H-LPSO相伸长同时粗化。挤压态合金经过固溶加时效(T6)处理后,大量β′相从α-Mg基体中析出。T6态合金的室温力学性能最好,其屈服强度、抗拉强度及伸长率分别为272 MPa、406 MPa和6.1%。β′相沉淀也发生在挤压态合金的直接人工时效(T5)处理过程,但相比于T6处理,14H-LPSO相和β′相在基体中的体积分数均偏低。     

激光立体成形TC4钛合金的热力场演化

激光立体成形能够实现高性能复杂零件的精确成形，但成形过程中的高温度梯度极易导致残余应力和变形，最终影响构件的几何精度和力学性能。通过搭建基板单边夹持原位热变形测量系统，探究了多道多层TC4钛合金成形件在激光立体成形过程中基板温度、变形的演化规律，分析了不同扫描策略对构件热应力场的影响。研究结果表明，构件的变形发展受其热历史驱使，扫描策略对成形件的热变形具有显著影响。     

基于镧锶锰氧化物基阴极的中温固体氧化物燃料电池的性能优化研究

为了提高基于镧锶锰氧化物(LaxSr1-xMnO3,LSM)阴极的中温固体氧化物燃料电池(Solid Oxide Fuel Cell,SOFC)的电化学性能,文章利用CuO清扫Ce0.85Sm0.15O2-δ(SDC)晶界的SiO2杂质以提高SDC的离子电导率,制备了复合电解质材料SDC-CuO,并将SDC-CuO和LSM结合成复合阴极材料,随后分别制备了以LSM和LSM/SDC-CuO作为阴极的SOFC,并研究了这两种SOFC的电化学性能。研究结果表明:在开路电压和工作温度为800℃的条件下,LSM/SDC-CuO基阴极的SOFC的极化电阻为0.14Ω·cm2,明显低于LSM基阴极SOFC的极化电阻(0.36Ω·cm2);LSM/SDC-CuO基阴极的SOFC的最大输出功率密度为237 mW/cm2,显著高于LSM基阴极的SOFC的最大输出功率密度(132 mW/cm2)。     

Synthesis and spectroscopic studies of some new azobenzenesulfonamide

Abstract

Diazotized sulfadiazine derivative (1) was coupled with some nitrogen heterocyclic namely (thiazolone derivatives 2a–c, thiazole derivatives 4a–c and barbituric acid derivatives 6a,b) to give the corresponding azo compounds 3a–c, 5a–c and 7a,b in good yields. The newly synthesized azo benzene sulfonamide dyes were recorded their UV visible spectra in the region 200–600?nm in four different solvents and discussed the effect of solvents, substituent and effect of acid and base on the absorption values of these dyes.     

适用于“一步酸溶法”生产氧化铝工艺中稀释料浆的高分子絮凝剂的合成

为达到"一步酸溶法"生产氧化铝工艺中稀释料浆在高温、高酸度工况下进行固液高效分离的目的,以丙烯酰胺(AM)与阳离子(DMDAAC)为共聚单体,通过水溶液聚合法合成了阳离子聚丙烯酰胺(CPAM)絮凝剂。以转化率和相对分子质量为目标,通过单因素分析法确定了最优的合成工艺条件,即反应温度30℃,单体总质量分数为30%,阳离子度5%,K2S2O8和NaHSO3质量分数均为0.005%,2,2′-偶氮二(2-脒基丙烷盐酸盐)(V50)质量分数为0.0025%,乙二胺四乙酸(EDTA)质量分数为0.05%的条件下,反应时间为6 h,获得相对分子质量为1.2×107溶解性能较好的阳离子型聚丙烯酰胺(CPAM)。